top of page

Signamax Data Systems

Signamax Logo.png
AboutUsPg-1.jpg

Media Converters

Signamax provides media conversion solutions that support data, voice, video and image transport over a wide variety of transmission media. These products convert an extensive assortment of data – from serial RS-232 through Standard, Fast, and Gigabit Ethernet protocols. Conversions from twisted-pair copper cable, multimode fiber, and singlemode fiber to many other types of cable are all possible with the comprehensive array of solutions from Signamax.

Media-Converters-GROUP-for-Web-Slider-e1457560024249.jpg

Media Converters

Gigabit Copper to Fiber Media Converters:

10/100/1000 to 100/1000 SFP Media Converter

​

​

​

​

​

10_100_1000 to 100_1000 SFP Media Converter.jpg

The Signamax 10/100/1000 to 100/1000 SFP Media Converters provides a flexible and intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and either 1000Base Gigabit Ethernet fiber or 100Base fiber networks. The built-in 10/100/1000 switch enables the fiber cable connection to operate at 1000 Mbps, while remaining completely 1000BaseSX/LX or 100BaseFX/BX standard-compliant for the fiber optic connection.

​

The dual-rate fiber converter includes the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes where required.  The Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme.

​

Download Specifications (PDF 320 Kb) Revised 03.30.2016

​

Download User’s Guide (PDF241 Kb) Revised 02.06.2012

10/100/1000 to 1000 SX/LX Media Converters

10_100_1000 to 1000 SX-LX Media Converters.jpg

The Signamax 10/100/1000 to 1000 SX/LX Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and 1000Base Gigabit Ethernet networks. The built-in switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX or 1000BaseLX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex legacy hub.

​

Improvements in the this series of media converters include: extremely low latency, the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes, provide auto-negotiation on the 1000Base fiber port or forced full-duplex mode where required, and the enabling or disabling of the Link Fault Signaling feature.

​

Download Specifications (PDF 358 Kb) Revised 03-24-2016
 

Download User’s Guide (PDF 189 Kb) Revised 01-10-2014

Ethernet Switches

C-600 Series PoE Lighting Managed Ethernet Switches

24 Port PoE Lighting Managed Switch

SC60010.jpg

Signamax provides Ethernet Switches to support installations from enterprise businesses to small offices. Our solutions deliver Power over Ethernet, cost-effective network speed, plug & play convenience, and network control capabilities through complete and comprehensive management options. Solve an extensive array of applications with standard, fast, and gigabit Ethernet options while powering devices over low-voltage cable, reducing labor costs and attain a rapid ROI.

​

Download Specifications (PDF 1.7 MB) Revised 2-2020

​

Download Quick Start Guide (PDF 172 KB) Revised 2-2020

​

Keystone-Outlet-System-Group-for-web-Section.jpg

Category 5e MT-Series Screened Keystone Jacks

KJS458MT-C5E-w-Cover-e1458934262591-150x138.jpg
KJS458MT-C6AC-Back-w-Cap-e1458930670161-150x143.jpg
KJS458MT-C6AC-Back-e1458930610901-150x139.jpg

Overview

The Signamax Category 5e MT-Series Screened Keystone Jacks have been designed to meet the need for today’s high-bandwidth applications. These connectors are slim in profile for the highest density applications and guarantee 100 meter four-connector channel performance in environments with elevated EMI levels.
 

Special design features allow these jacks to be terminated with a standard 110 single-position tool or with the Signamax four-pair tool. The contact design provides enhanced plug-to-jack connection integrity allowing for easy connection to the telecommunication bonding and grounding systems.

​

  • Exceeds TIA-568-C.2 component performance specifications

  • Supports TIA-568-C.2 category 5e 100 meter 4-channel performance

  • Overall solid-metal shielding design for 360-degree screen coverage

  • Improved wire retention and ease of termination with rear 110 type contacts

  • Easy-to-read T568A/B wiring scheme color-code label

  • Compatible with Signamax screened snap-in patch panels and work area faceplates

  • Circuit identification icons and dust covers included in kit

Category 6 MT-Series Screened Keystone Jacks

KJS458MT-C5E-w-Cover-e1458934262591-150x138.jpg
KJS458MT-C6AC-Back-w-Cap-e1458930670161-150x143.jpg
KJS458MT-C6AC-Back-e1458930610901-150x139.jpg

Overview

The Signamax Category 6 MT-Series Screened Keystone Jacks have been designed to meet the need for today’s high-bandwidth applications. These connectors are slim in profile for the highest density applications and guarantee 100 meter four-connector channel performance in environments with elevated EMI levels.

​

Special design features allow these jacks to be terminated with a standard 110 single-position tool or with the Signamax four-pair tool. The contact design provides enhanced plug-to-jack connection integrity allowing for easy connection to the telecommunication bonding and grounding systems.

​

  • Exceeds TIA-568-C.2 component performance specifications

  • Supports TIA-568-C.2 category 5e 100 meter 4-channel performance

  • Overall solid-metal shielding design for 360-degree screen coverage

  • Improved wire retention and ease of termination with rear 110 type contacts

  • Easy-to-read T568A/B wiring scheme color-code label

  • Compatible with Signamax screened snap-in patch panels and work area faceplates

  • Circuit identification icons and dust covers included in kit

bottom of page